###
### Thu Jun 30 11:04:30 EDT 2005:
### /usr/pkg/bin/bmake bulk-package for fluidsynth-1.0.5
### Current pkg count:  4 installed packages: digest-20050323 libtool-base-1.5.18nb3 pkg_install-info-4.5nb3 readline-5.0
###
BULK> Full rebuild in progress...
BULK> Cleaning package fluidsynth-1.0.5 and pre-requisite packages
===> Cleaning for fluidsynth-1.0.5
===> Cleaning for libtool-base-1.5.18nb3
===> Cleaning for readline-5.0
===> Cleaning for pkg_install-info-4.5nb3
BULK> Removing installed packages which are not needed to build fluidsynth-1.0.5
BULK> Keeping BULK_PREREQ: digest-20050323 (pkgtools/digest)
BULK> fluidsynth-1.0.5 requires installed package readline-5.0 (devel/readline) to build.
BULK> fluidsynth-1.0.5 requires installed package pkg_install-info-4.5nb3 (pkgtools/pkg_install-info) to build.
BULK> fluidsynth-1.0.5 requires installed package libtool-base-1.5.18nb3 (devel/libtool-base) to build.
BULK> Installing packages which are required to build fluidsynth-1.0.5.
BULK> Required package libtool-base-1.5.18nb3 (devel/libtool-base) is already installed
BULK> Required package readline-5.0 (devel/readline) is already installed
BULK> Required package pkg_install-info-4.5nb3 (pkgtools/pkg_install-info) is already installed
BULK> Required package digest-20050323 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (fluidsynth-1.0.5)
===> Checking for vulnerabilities in fluidsynth-1.0.5
=> fluidsynth-1.0.5.tar.gz doesn't seem to exist on this system.
=> Attempting to fetch fluidsynth-1.0.5.tar.gz from ftp://netbsd.stevens-tech.edu/pub/NetBSD/packages/distfiles/.
=> [991183 bytes]
=> Checksum SHA1 OK for fluidsynth-1.0.5.tar.gz.
=> Checksum RMD160 OK for fluidsynth-1.0.5.tar.gz.
work -> /pkgobj/audio/fluidsynth/work
===> Extracting for fluidsynth-1.0.5
===> Required installed package readline>=5.0: readline-5.0 found
===> Required installed package libtool-base>=1.5.18nb1: libtool-base-1.5.18nb3 found
===> Patching for fluidsynth-1.0.5
===> Applying pkgsrc patches for fluidsynth-1.0.5
===> Overriding tools for fluidsynth-1.0.5
===> Creating toolchain wrappers for fluidsynth-1.0.5
===> Configuring for fluidsynth-1.0.5
=> Adding rpaths to pkgconfig files.
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking for gawk... /usr/bin/nawk
checking whether make sets $(MAKE)... yes
checking for sparc-sun-solaris2-strip... no
checking for strip... strip
checking for sparc-sun-solaris2-gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... no
checking whether cc accepts -g... yes
checking for cc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of cc... none
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking build system type... sparc-sun-solaris2.8
checking host system type... sparc-sun-solaris2
checking for a sed that does not truncate output... /pkgobj/audio/fluidsynth/work/.tools/bin/sed
checking for egrep... grep -E
checking for non-GNU ld... /pkgobj/audio/fluidsynth/work/.wrapper/bin/ld
checking if the linker (/pkgobj/audio/fluidsynth/work/.wrapper/bin/ld) is GNU ld... no
checking for /pkgobj/audio/fluidsynth/work/.wrapper/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for sparc-sun-solaris2-g++... CC
checking whether we are using the GNU C++ compiler... no
checking whether CC accepts -g... yes
checking dependency style of CC... none
checking how to run the C++ preprocessor... CC -E
checking for sparc-sun-solaris2-g77... f77
checking whether we are using the GNU Fortran 77 compiler... no
checking whether f77 accepts -g... no
checking the maximum length of command line arguments... 262144
checking command to parse nm output from cc object... failed
checking for objdir... .libs
checking for sparc-sun-solaris2-ar... no
checking for ar... ar
checking for sparc-sun-solaris2-ranlib... no
checking for ranlib... ranlib
checking for sparc-sun-solaris2-strip... strip
checking if cc static flag  works... yes
checking for cc option to produce PIC... -KPIC
checking if cc PIC flag -KPIC works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/pkgobj/audio/fluidsynth/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... solaris2 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the CC linker (/pkgobj/audio/fluidsynth/work/.wrapper/bin/ld) supports shared libraries... yes
checking for CC option to produce PIC... -KPIC
checking if CC PIC flag -KPIC works... yes
checking if CC supports -c -o file.o... yes
checking whether the CC linker (/pkgobj/audio/fluidsynth/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... solaris2 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for f77 option to produce PIC... -KPIC
checking if f77 PIC flag -KPIC works... no
checking if f77 supports -c -o file.o... no
checking whether the f77 linker (/pkgobj/audio/fluidsynth/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... solaris2 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking whether make sets $(MAKE)... (cached) yes
checking for pthread_create in -lpthread... yes
checking for ANSI C header files... (cached) yes
checking for string.h... (cached) yes
checking for stdlib.h... (cached) yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for unistd.h... (cached) yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking for sys/types.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/stat.h... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking for inline... inline
checking whether byte ordering is bigendian... yes
checking for pkg-config... no
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
checking for fcntl.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/soundcard.h usability... no
checking sys/soundcard.h presence... no
checking for sys/soundcard.h... no
checking machine/soundcard.h usability... no
checking machine/soundcard.h presence... no
checking for machine/soundcard.h... no
configure: WARNING:  *** Could not find soundcard.h, disabling OSS driver
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
checking CoreAudio/AudioHardware.h usability... no
checking CoreAudio/AudioHardware.h presence... no
checking for CoreAudio/AudioHardware.h... no
checking for readline... not present.
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
configure: creating ./config.status
config.status: creating Makefile
config.status: creating macbuild/Makefile
config.status: creating sf2/Makefile
config.status: creating winbuild/Makefile
config.status: creating winbuild/fluidsynth/Makefile
config.status: creating winbuild/fluidsynth_dll/Makefile
config.status: creating winbuild/fluidsynth_lib/Makefile
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating include/Makefile
config.status: creating include/fluidsynth/Makefile
config.status: creating include/fluidsynth/version.h
config.status: creating fluidsynth.pc
config.status: creating fluidsynth.spec
config.status: creating src/config.h
config.status: executing depfiles commands

**************************************************************
Summary:
ALSA:                  no
OSS:                   no
MidiShare:             no
JACK:                  no
CoreAudio:             no
Readline:              no
LADCCA support:        no
Debug:                 no
Profiling:             no
LADSPA support:        no
use long long:         no
Pentium 3+ SSE:        no
**************************************************************

===> Building for fluidsynth-1.0.5
Making all in macbuild
cd .. && /bin/ksh ./config.status macbuild/Makefile 
config.status: creating macbuild/Makefile
Making all in sf2
cd .. && /bin/ksh ./config.status sf2/Makefile 
config.status: creating sf2/Makefile
Making all in winbuild
Making all in fluidsynth
cd ../.. && /bin/ksh ./config.status winbuild/fluidsynth/Makefile 
config.status: creating winbuild/fluidsynth/Makefile
Making all in fluidsynth_dll
cd ../.. && /bin/ksh ./config.status winbuild/fluidsynth_dll/Makefile 
config.status: creating winbuild/fluidsynth_dll/Makefile
Making all in fluidsynth_lib
cd ../.. && /bin/ksh ./config.status winbuild/fluidsynth_lib/Makefile 
config.status: creating winbuild/fluidsynth_lib/Makefile
cd .. && /bin/ksh ./config.status winbuild/Makefile 
config.status: creating winbuild/Makefile
Making all in src
cd .. && /bin/ksh ./config.status src/config.h
config.status: creating src/config.h
config.status: src/config.h is unchanged
/usr/pkg/bin/bmake  all-am
cd .. && /bin/ksh ./config.status src/Makefile depfiles
config.status: creating src/Makefile
config.status: executing depfiles commands
source='fluid_adriver.c' object='fluid_adriver.lo' libtool=yes  depfile='.deps/fluid_adriver.Plo' tmpdepfile='.deps/fluid_adriver.TPlo'  depmode=none /bin/ksh ../depcomp  /bin/ksh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.  -I./../include       -I/usr/pkg/include -I/usr/include  -O -DDEVOSSAUDIO="\"/dev/audio\"" -I/usr/pkg/include -I/usr/include -Wall  -Wall -W -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wstrict-prototypes -Wno-unused -Winline -c -o fluid_adriver.lo `test -f 'fluid_adriver.c' || echo './'`fluid_adriver.c
mkdir .libs
 cc -DHAVE_CONFIG_H -I. -I./../include -I/pkgobj/audio/fluidsynth/work/.buildlink/include -O -DDEVOSSAUDIO=\"/dev/audio\" -Wall -Wall -W -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wstrict-prototypes -Wno-unused -Winline -c fluid_adriver.c  -KPIC -DPIC -o .libs/fluid_adriver.o
"fluidsynth_priv.h", line 209: warning: no explicit type given
"fluidsynth_priv.h", line 209: syntax error before or at: uint8
"fluidsynth_priv.h", line 209: warning: old-style declaration or incorrect type for: uint8
"fluidsynth_priv.h", line 211: warning: no explicit type given
"fluidsynth_priv.h", line 211: syntax error before or at: uint16
"fluidsynth_priv.h", line 211: warning: old-style declaration or incorrect type for: uint16
"fluidsynth_priv.h", line 213: warning: no explicit type given
"fluidsynth_priv.h", line 213: syntax error before or at: uint32
"fluidsynth_priv.h", line 213: warning: old-style declaration or incorrect type for: uint32
"fluidsynth_priv.h", line 215: warning: no explicit type given
"fluidsynth_priv.h", line 215: syntax error before or at: uint64
"fluidsynth_priv.h", line 215: warning: old-style declaration or incorrect type for: uint64
cc: acomp failed for fluid_adriver.c
*** Error code 1

Stop.
bmake: stopped in /pkgobj/audio/fluidsynth/work/fluidsynth-1.0.5/src
*** Error code 1

Stop.
bmake: stopped in /pkgobj/audio/fluidsynth/work/fluidsynth-1.0.5/src
*** Error code 1

Stop.
bmake: stopped in /pkgobj/audio/fluidsynth/work/fluidsynth-1.0.5
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/audio/fluidsynth
===> 
===> There was an error during the ``build'' phase.
===> Please investigate the following for more information:
===>      * log of the build
===>      * /pkgobj/audio/fluidsynth/work/.work.log
===> 
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/audio/fluidsynth

Please view the work log for fluidsynth-1.0.5


BULK> fluidsynth-1.0.5 was marked as broken:
-rw-r--r--   1 root     other      15075 Jun 30 11:07 .broken.html
/usr/pkg/bin/bmake deinstall
===> Deinstalling for fluidsynth
BULK> Marking all packages which depend upon fluidsynth-1.0.5 as broken:
BULK> Build for fluidsynth-1.0.5 was not successful, aborting.